(navigation image)
Home American Libraries | Canadian Libraries | Universal Library | Community Texts | Project Gutenberg | Children's Library | Biodiversity Heritage Library | Additional Collections
Search: Advanced Search
Anonymous User (login or join us)
Upload
See other formats

Full text of "Paper Crafts"

Fabricate Pieces to Complete a Defective Jigsaw Puzzle 



i 



Make Projects 



build, hack, tweak, share, discover,' 



Fabricate Pieces to Complete a 



Defective Jigsaw Puzzle 



Written By: Francis 



f TOOLS: ! © PARTS: 



Computer running Windows (1) ■ • 3-in-1 Printer. Scanner. Copier (1) 

Any version of Windows that comes with 
Microsoft Paint will suffice for this \ 

project. 



SUMMARY 

What you'll need to begin: 

THE BOX in which your puzzle came (hopefully, with a picture of the completed puzzle on it); A typical 3-in-1 style 
printer-scanner-copier (with ink, of course); Photo paper (I'd use gloss finish, depending on the puzzle); Microsoft 
Paint (which is on virtually every computer, new or old, running Windows); A FINE POINT pen (to make it easier to 
outline, you might just pull the cartridge out of the shell of the pen); A scissors; A piece of CARDBOARD (thickness 
also depending upon the puzzle); Krazy Glue (brush-on is probably the easiest to use); An X-ACTO knife. 



© Make Projects www.makeprojects.com Page 1 of 9 



Fabricate Pieces to Complete a Defective Jigsaw Puzzle 







*C Cut-Out- Fbc* 




V 



L I 










• If you're running l/l//ndoi/i/s, you can access Microsoft Paint through the ST>4/?T button: 
either by selecting Accessories] or by entering mspaint.exe in the /?IWV command 
window. 

• Turn on your 3-in-1 device, and place a good picture of the completed puzzle (from the box 
presumably) on its scanning surface. It doesn't really matter if you get the entire image 
of the puzzle in your scan; but rather, that you successfully copy the area you need 
to duplicate pieces from. Most likely, you're going to start out with a scan image that is 
PROPORTIONATE, but also smaller than the actual completed puzzle. Do try to get as 
much of the image as you possibly can (it'll make things easier later). 

• Once in Paint: go to FILE, and select "From Scanner or Camera." This will pop-up a 
smaller window with a button that says "Scan". Select to scan; and then wait for the image 
to completely visualize on screen. 



© Make Projects 



www.makeprojects.com 



Page 2 of 9 



Fabricate Pieces to Complete a Defective Jigsaw Puzzle 










P? 



rVKil 5> ( «ij M-m la teal *■ 

■ -^ ■ - .|z . . , 

*i\ C-'i 1 1 

liJc-=— ^ 

. — 






. '-r- |;. Km- i| J^l . 



* S^-an tKlnp iip p« 1 AKJ ht Ik 



Whal do you wand to wan? 

-WLItlMI'l 

O ft M* Jkfld AhU f^J J* STBtot 



ft 



J~ O EntanSilflg* 






r?v 




Pwigw acjn [-red 




A preview of the scan of your puzzle box will appear in the open window, after you press 
the "Pre view" button. If you need to CROP your image, look for the squares on the edge 
of the dash-lines that appear around the image; and then simply drag these to cut off 
everything but the puzzle. 

In the example: you can see that I had a circular puzzle; and in fact, part of the box image 
was also just a tad too big for the scan surface to capture entirely. Again, what is more 
important really, is that you get a good scan of the area of the puzzle that you need to 
duplicate (in my case, it was the woman's knee). Even still, I cropped my scan to just 
the edge of the puzzle, as best I could. 

Likely, your puzzle box image is small by comparison; which means, you're going to need 
to ENLARGE the scanned image you create. Before we accomplish this though, let's make 
sure everything remains proportionate, in the next step... 



© Make Projects 



www.makeprojects.com 



Page 3 of 9 



Fabricate Pieces to Complete a Defective Jigsaw Puzzle 




• A nifty feature that comes as part of the Paint program, is the "Attributes" tool, found 
under the IMAGE menu. Selecting this will give precise measures of your scan, in any of 
three units (inches, centimeters, or pixels, if you prefer). 

• Again, in my example: note that the my "width" and "height" dimensions ought to match 
(because it's a circular puzzle, and ought to have a diameter equal to either 
measurement), though they do not. This is simply on account of my box image being larger 
than the scan surface of my 3-in-1 . And as such: I need to account for the missing area, 
before I can go any further. MEASURE the dimensions of your box image with a RULER, 
if necessary. 

• If need be also, in your own case: entering a number in either "width" or "height" \n\\\ 
simply extend the area of the scan without distorting the picture. A blank white area 
will then appear in place of any missing part of the scan image. Do this to match the real- 
life dimensions of your puzzle box image. 

• Once again: the result is likely a smaller image; but only now at least it is proportionate 
to the full-scale puzzle. You are now ready to dilate the image, in the next step... 



© Make Projects 



www.makeprojects.com 



Page 4 of 9 



Fabricate Pieces to Complete a Defective Jigsaw Puzzle 




. start 



i-tftacVfca... p . :.M?top 



© Make Projects 



www.makeprojects.com 



Page 5 of 9 



Fabricate Pieces to Complete a Defective Jigsaw Puzzle 

• Make a note of the actual dimensions of the completed puzzle (usually found on the front 
or side of the box). Then, go back to the IMAGE menu on the task bar, and select 
"Stretch and Skew. " 

• In the entry fields for "Horizontal" and "Vertical", you can enter a number either larger 
than 100%, or smaller (100% being the size of the image, as it currently appears on 
screen; and a number either greater or lesser than 100, enlarging or reducing its size, 
respectively). Determining what percentage to enter requires a little math... 

• My puzzle, for example, ought to be = 19.5 inches across. However, my scan is only = 
9.47 inches across so the scan image obviously has to be enlarged! DIVIDING these 
two numbers (the ACTUAL PUZZLE Dimension -=- the SCAN IMAGE Dimension) 
provides us with a useful RATIO. 

• Mathematically speaking: a ratio can be expressed as a decimal number; which, in turn, 
can be expressed as a percentage. So the scheme is: convert our RATIO to a 
DECIMAL to a PERCENTAGE. 

• TO ENLARGE THE SCAN: the greater number is written on top in the ratio (which is the 
same as the larger number being entered into a calculator 1st)... 19.5 / 9. 47 19.5 -=- 9. 
47 = 2.0591341077085533262935586061246. Or « 2.06 206%. 

• So that means, in my case, I have to plug the number 206, in each of the "Stretch" entry 
fields for "Horizontal" and "Vertical" %. Doing so will enlarge my scan image to match 
the actual dimensions of the completed puzzle. Yay! :) 

• If instead, you need to reduce the scan size: the greater number would be written as the 
bottom of the ratio (which is same as that number being entered into a calculator 2nd); and 
then divided as before. Once you have your decimal figure, always move your decimal 
point TWICE to the right (which is the same as multiplying by 100, to form a percent). 
Round to the nearest whole percent. 



© Make Projects www.makeprojects.com Page 6 of 9 



Fabricate Pieces to Complete a Defective Jigsaw Puzzle 





ri-HHIHPHITMHM 
■ I ■■ P 




CE=E 




Now, rather than waste ink or printer paper: scroll over to the area you need to make a 
puzzle piece from. Select the cutting icon from the Paint tools (along the left side of 
the screen), and proceed to chop out the area that you want in particular. 

Then: go up to FILE again; open a "New" Paint window; and paste this section from the 
old window into the new one. 

To see if the image now fits on a single page, before printing: under "FILE" select "Print 
Preview". If it makes a better fit for printing: change the print area from "Portrait" to 



"Landscape" style; or try narrowing the area again with the cutting tool. To change the 
print settings (from portrait to landscape), choose "Page Setup", and select either setting 
from the pop-up window. 

• Depending on the puzzle, you might print in either matte or gloss finish. Remember, of 
course, to load your printer tray with at least one page of either type of photo paper-and 
then print! 



© Make Projects 



www.makeprojects.com 



Page 7 of 9 



Fabricate Pieces to Complete a Defective Jigsaw Puzzle 






-,&5Vc3' ' 




f •* 




% 




• Once you've printed: place the photo print beneath the hole in your puzzle; and then 
try to align the two, by judging from the pattern. 

• Next, carefully trace the outer edge of the hole in your puzzle, onto the underlying photo 
print. 







To save glue (which is also an eye irritant): I cut down the photo area to just a simple 

square, slightly larger than the outline of my puzzle hole. 

I next cut out a slightly larger square of cardboard. You can use corrugated cardboard 



ike I did; but if you can find a thick enough piece of scrap cardstock-esque cardboard, I 
would use that instead (it makes cutting less arduous). 

Just to avoid the possibility of getting glued fingers, you might choose to wear some 
rubber gloves from this point onward. :) 

Finally: apply quick drying, clear adhesive to the back of the photo paper; and then 
press it to the cardboard. I prefer brush-on Krazy Glue for this purpose. 



© Make Projects 



www.makeprojects.com 



Page 8 of 9 



Fabricate Pieces to Complete a Defective Jigsaw Puzzle 







The last step is a little tedious. But generally, the more time you take, the better the 
outcome. Using an X-acto knife: carefully trace the outline of the missing puzzle piece, 
repeatedly; until you've pierced through each later of material, all the way around. 

TAKE YOUR TIME! 

Invariably, some of the photo ink will chip while cutting. So, to better blend your 
homemade piece within your completed puzzle: you might just dab a felt tip marker 
along the edges; using a similar color, or several if necessary. 







• Here are results from two different puzzles I've done. In the second example, there were 
actually two pieces missing from the manufacturer. Fortunately, they were adjacent; so I 
just made one large piece to replace them both. 



You can do it! :) 



This document was last generated on 201 2-1 1 -03 01 :04:08 PM. 



© Make Projects 



www.makeprojects.com 



Page 9 of 9